Asphalt self adhesive seam sealing tape
This products can be used for general flashing applications,
sealing glazing bars, sealing leaks in gutters, valleys, down
pipes, capping, caravan seams and various corrugated and flat
roofs. Also suitable for sealing roof lights and repairs to crackedglass.
a. instant waterproof seal, even in famp conditions.
b.quick and easy to apply, no specialist tools required.
c.4 layers or protection: lacquer foil, membrane and bitumen
d.superior temperature resistance from -20℃ to +100℃ -easily moulds to contours.
e.long lasting protection, at least 15 years
f.available in a wide range of sizes.
Storage Life: 12 months stored between 5 ℃ and 25℃ in original
1. Product description:
The product is a kind of polymer modified asphalt materials, using
polyester carpet or glass mat for the matrix, the surface covered
with polyethylene film, aluminum foil or fine sand, the base
covered with a release sheet,keep the self-adhesive flexible
waterproof. The product has a good self-adhesive and bending
Construction is simple, clean, and can be widely used in roofing,
basement, bathroom, etc. waterproofing works, and for legislation
to pave and stick and pipe wall (except heat pipes), bridges , and
other complex environment, especially in open flame is prohibited,
covert fire waterproofing works.
Cut flashing to the required length, remove the release film and
press down the adhesive bitumen to the previously prepared surface.
Ensure full contact by smoothing down with a cloth, taking care to
eliminate air bubbles.
Final rolling down of the edges with a wallpaper roller will ensure
a good edge seal.
All overlaps should be a minimum of 25mm and well rolled down.
Note: In cold weather adhesion will be imporved by storing the roll
in a warm room for 12 hours or more before use, or by gently
warming the strip during application.Do not applybelow 5 ℃.
1mm,1.2mm, 1.5mm, 2.0mm, 2.5mm, 3mm, 4mm.
3m, 5m, 10m, 15m, 20m
Flashing, repairs, guttering, downpipes, glazing bars, capping, sealing